Designers & manufacturers of car luggage solutions since 2008.

Home Page

 

Grid List

Set Descending Direction

1-15 of 140

  1. Alfa Romeo Spider Gepäckträger
    £98.95
    Alfa Romeo Spider Gepäckträger Willkommen zu boot-bag.com schaffen zusätzlichen Stauraum für Ihren Alfa Spider Die Alternative zu einem Chrom-Kofferraum-Träger gibt Ihrem Cabrio oder Ihrer Limousine 50 Liter mehr wasserdichten Gepäckraum.    Vorteile dieser Gepäckträger system für alle Alfa Spider Völlig wasserdicht Wird mit weichem Gurtband befestigt – der Lack wird nicht beschädigt Sitzt auf einer weichen Anti-Rutsch-Matte Hergestellt in Großbritannien Keine Metallbefestigungen – die Tasche wird den Lack Ihres Autos nicht ankratzen. Wenn die Gurte einmal angezogen sind, verrutscht die Tasche nicht mehr. Keine Schäden am Lack. Der boot-bag hat zwei Befestigungspunkte, die oben auf die Tasche geschweißt sind. Daran wird ein H-förmiger Harnisch befestigt und an dem wiederum die Gurte. Das bedeutet, dass die Tasche ABSOLUT wasserdicht ist und nicht verrutscht, wenn sie am Kofferraumdeckel befestigt ist.  Der boot-bag Original misst 70 x 36 x 20 cm (28" x 15" x 8") und bietet 50 Liter zusätzlichen Gepäckraum. Die weiche Anti-Rutsch-Matte ist mit 80 x 40 cm ein wenig größer. Learn More
  2. alfa spider trunk rack
    £98.95
    Boot-bag Original is the smaller of the two models we make. Its a waterproof luggage holdall that simply straps to the bot/trunk of your Alfa Romeo shown on a classic spider, Brera Spider and 916. Boot-bag Original adds 50 litres or 1.75 cubic feet of extra luggage space. It measures 70x36x20cm / 27.5"x15"x8". We have been making Boot-bags since 2008 and have sold over 10,000 they are all hand made in Buckinghamshire England. Why boot-bag for Alfa Spider instead of a boot or luggage rack ? Fully Waterproof & No risk of any paintwork damage Attaches using soft webbing so no damage to paint or boot/trunk lid edge. Boot-bag has a soft base no studs or clips to damage paint Sits on a soft non slip fabric mat to protect paint : 4mm/0.15" thick 14 day no quibble money back guarantee. Hand made in Buckinghamshire since 2008 over 10,000 sold - tried & tested. Folds flat for easy storage, can be removed in minutes and stored inside if you stop. Saves you money ; half the price of a traditional luggage rack and waterproof holdall/suitcase If you buy a traditional luggage rack you still need waterproof luggage... Learn More
  3. audi a1 ski rack
    £134.95
    Audi A1 Ski & Snowboard Rack No Roof Bars Audi A1 Ski & Snowboard Ski Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi A1 ski 7 snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi A1 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  4. Audi A3 Ski Rack
    £134.95
    Audi A3 Ski & Snowboard Rack No Roof Bars Audi A3 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi A3 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi A3 Ski & Snowboard Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  5. Audi A4 Ski Rack
    £134.95
    Audi A4 Ski & Snowboard Rack No Roof Bars Audi A4 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi A4 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi A4 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  6. audi a5 sportback ski rack
    £134.95
    Audi A5 Ski & Snowboard Rack No Roof Bars Audi A5 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi A5 snowboard and ski rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Ski & Board Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  7. audi a6 ski rack
    £134.95
    Audi A6 Ski & Snowboard Rack No Roof Bars Audi A6 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi A6 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi A6 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  8. audi a7 ski and snowboard rack
    £134.95
    Audi A7 Ski & Snowboard Rack No Roof Bars Audi A7 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi A7 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi A7 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  9. Audi Q3 Ski Rack
    £134.95
    Audi Q3 Ski & Snowboard Rack No Roof Bars Audi Q3 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi Q3 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi Q3 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  10. audi q5 snowboard rack
    £134.95
    Audi Q5 Ski & Snowboard Rack No Roof Bars Audi Q5 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi Q5 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi Q5 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  11. audi q7 ski rack
    £134.95
    Audi Q7 Ski & Snowboard Rack No Roof Bars Audi Q7 Ski / Snowboard Rack ? We import the innovative VX car ski and snowboard rack from Italy. They can hold 3 sets of ski's or 2 snowboards This Audi Q7 ski & snowboard rack attaches without roof rails, roof bars and will fit any car with a steel roof and a flat ish section more than one metre long. The rack features two holders that are placed 70cm apart. These holders each have two magnetic pads that hold the rack in place very securely. The VX rack has passed crash tests designed for roof bars and complies with ISO/PAS 11154 . In short its not going to fly off, considerable effort is required to remove the rack from your roof. The racks magnets are rubber and flex to fit the curves of your roof, they also won't scratch or damage paint as they are semi soft in nature and not solid metal. Why this VX Audi Q7 Ski Rack ? No roof bars or rails required Universal fit for 99% of cars Holds 3 sets of skis or 2 snowboards Holders must be placed 70cm apart - not suitable for cars with large sunroofs Secures to roof using very powerful rubber backed magnets that won't damage paint Supplied with security cable to prevent theft Locking covers/holders Crash tested to ISO/PAS 11154 ( standard for roof bars with Ski's on ) Complies with EU Directive EEC 79/4888 relating to safety of roof bars / racks Fitted and removed in seconds Each unit measures 55cm wide 25cm deep 25cm tall, small & easy to store when not in use 35cm of width to fit skis and boards into Held in stock despatched within 48 hrs of order For more information see www.ski-rack.co.uk We ship globally Learn More
  12. Audi TT Roadster bagagerek 8s
    £229.95
    Audi TT Roadster bagagerek: Revo-Rack Revo-Rack is een revolutionaire Audi TT Roadster bagagedrager die het risico op beschadiging van de autolak, veroorzaakt door stalen klemmen of riemen aan de rand van de kofferbak vrijwel elimineert. Dankzij het universele design past het op elke achterklep of elk kofferdeksel waarop het rek qua afmetingen past, ongeacht hun grootte of vorm. Bij het Revo-Rack TT Roadster bagagerek zijn er geen metalen delen die de auto raken, alleen zachte rubberen vacuümcups. Deze maken gebruik van de atmosferische druk om het rek aan de kofferbak van uw auto te bevestigen. Waarom een Revo-Rack Audi TT Roadster bagagerek? Geen klemmen Geen bouten Geen boorgaten Geen beschadiging van de lak Kan in combinatie met een spoiler worden gebruikt Perfect voor de sportauto’s van tegenwoordig die te kleine ruimtes tussen de panelen hebben voor een traditionele klem Past op elk kofferdeksel waarop het rek met een voetafdruk van102 x 58 cm (58" x 29") past Het draagvermogen van het Revo-Rack is gespecificeerd als 20 kg Het rekframe: Dit MX5 bagagerek is gemaakt van 25-mm dikke 6063-T5 buizen. Dit is een aluminium-magnesium legering (die nooit roest). Het rekframe weegt daarom slechts 1,672 kg – perfect voor de aluminium en composiet kofferdeksels van tegenwoordig. De dwarsstangen zijn machine-gelast voor consistente kwaliteit en het rek heeft een zwarte poedercoating. De afmetingen zijn 900 x 420 mm (36" x 17"). Bevestiging van het rek: Het rek wordt aan het kofferdeksel van uw auto bevestigd met drie vacuümcups van 115 mm met een door de fabrikant gespecificeerde houdkracht van 18 kg elk. Vacuümcups maken gebruik van de kracht van de atmosferische druk om zich aan een oppervlak vast te grijpen. Wanneer er een vacuüm is tussen de cup en het oppervlak waaraan deze is bevestigd, houdt het gewicht van de aardatmosfeer de cup op zijn plaats met ongelooflijke kracht. Anders dan bij zuignappen waarbij een vacuüm wordt getrokken naarmate de nappen van het oppervlak worden weggetrokken, wordt bij de vacuümcups van het Revo-Rack een handpomp gebruikt om de lucht efficiënt te onttrekken tussen de rubberen cup en het oppervlak waarop deze is bevestigd. Dit zorgt voor een veel betrouwbaardere klemkracht. De pomp van de Revo-Rack vacuümcups is voorzien van een zuiger met een rode lijn, die bedoeld is als vacuümindicator. Door enkele slagen van de zuiger wordt een vacuüm gezogen waardoor de cup op het kofferdeksel wordt vastgezogen. Wanneer de cup volledig is vastgezogen, stopt de zuiger en is de rode lijn onzichtbaar in de pomp. Als de rode lijn zichtbaar is, duidt dit erop dat er lucht in de rubberen cup is teruggelekt, waardoor het vacuüm onvoldoende is om de cup te gebruiken. Als de rode lijn echter zichtbaar wordt terwijl de cup in gebruik is, zorgt een terugslagventiel dat de cup opnieuw kan worden vacuüm gepompt zonder het overige vacuüm te verliezen. Door het optillen van de ontgrendelingslip aan de rand van de cup kan de vacuümruimte weer met lucht worden gevuld, waardoor de vacuümcup volledig loskomt. Het rek bevindt zich op 7,5 cm boven de achterklep/het kofferdeksel. Learn More
  13. Audi TT Cabrio Gepäckträger
    £229.95
    Revo-Rack ist ein völlig neuartiger TT Roadster Gepäckträger, bei dem das Risiko von Lackschäden durch Stahlklammern oder Riemen an der Kante des Kofferraumdeckels nahezu vollständig ausgeschlossen ist. Sein universelles Design erlaubt es, den Träger auf Kofferraumdeckeln jeglicher Form und Größe anzubringen, solange diese größer sind als der Träger selbst. Beim Revo-Rack TT Roadster Gepäckträger kommt kein Metall mit Ihrem Auto in Berührung, nur weiche Vakuumnäpfe aus Gummi. Diese nutzen den atmosphärischen Druck, um den Gepäckträger auf dem Kofferraum Ihres Autos zu sichern. TÜV Revo-Rack wurde TÜV von Italien nach ISO 11154 getestet. Die Betriebserlaubnis des Fahrzeugs ohne zusätzliche Registrierung beibehalten. Warum einen Revo-Rack Gepäckträger? TÜV geprüft Keine Klammern Keine Schrauben Kein Bohren Kein Lackschaden Ist der Anbringung eines Spoilers nicht im Weg Perfekt für moderne Sportwagen, bei denen die Karosseriefugen zu klein für traditionelle Klammern sind Passt auf jeden Kofferraumdeckel, der mindestens die 102 x 48 cm Außenmaße des Gepäckträgers hat. Der Revo-Rack ist bis zu 20 kg zugelassen Der Gepäckträgerrahmen: Dieser TT Gepäckträger ist aus 25 mm 6063-T5 Rohr gefertigt. Das ist eine Aluminium/Magnesium Legierung (es wird nie rosten). Dadurch wiegt der Gepäckträgerrahmen nur 1,672 kg - perfekt für die heutigen Kofferraumdeckel aus Aluminium und Verbundwerkstoffen. Die Querstangen sind maschinengeschweißt, um Konsistenz zu gewährleisten, der Träger ist pulverbeschichtet in Schwarz. Der Rahmen misst 900 x 420 mm Die Stützen: Der Träger wird auf dem Kofferraumdeckel Ihres Autos mit drei 115 mm Vakuumnäpfen befestigt, die laut Herstellerangabe jeweils bis zu 18 kg tragen können. Vakuumnäpfe nutzen die Kraft des atmosphärischen Drucks, um sich auf einer Fläche festzuhalten: Wenn zwischen dem Napf und der Oberfläche, auf dem dieser befestigt ist, ein Vakuum existiert, hält das Gewicht der Erdatmosphäre den Napf mit unglaublicher Kraft fest. Im Gegensatz zu Saugnäpfen, die ein Vakuum erzeugen, wenn sie von der Oberfläche wegziehen, benutzen die Revo-Rack Vakuumnäpfe eine handbetriebene Pumpe, um die Luft zwischen der Gummiauflage und der Befestigungsoberfläche effektiv zu entfernen, was eine deutlich bessere Befestigung schafft. Die Vakuumnäpfe des Revo-Rack besitzen einen Kolben mit einer roten Linie, der als Vakuumanzeige dient. Schon wenige Bewegungen des Kolbens reichen, den Vakuumnapf zu entleeren und so eine sichere Versiegelung am Kofferraumdeckel zu schaffen. Sobald der Napf vollständig angebracht ist, hört der Kolben auf, sich zu bewegen, und die rote Linie ist in der Pumpe verdeckt. Eine sichtbare rote Linie zeigt an, wenn Luft in den Napf eingedrungen und das Vakuum nicht mehr ausreicht, den Napf zu nutzen. Sollte die rote Linie sichtbar werden, währender der Napf genutzt wird, gibt es allerdings ein Kontrollventil, das es dem Nutzer erlaubt, den Napf abzupumpen, ohne das verbliebene Vakuum zu verlieren. Durch ein Anheben des Lösezapfens am Rand der Gummiauflage lässt man Luft in das Vakuum, so dass sich der Vakuumnapf vollständig ablösen lässt. Der Gepäckträger sitzt 7,45 cm über dem Kofferraumdeckel. Learn More
  14. audi tt mk3 roadster luggage rack
    £229.95
    Revo-Rack is a completely new type of Audi TT luggage rack that virtually eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge. With the Revo-Rack Audi TT Roadster Luggage Rack no metal touches your car only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot or trunk. Why a Revo-Rack Audi TT Luggage Rack ? No clamps No bolts No drilling No paint damage Fits all 3 models, 1998 - today and does not interfere with spoiler deployment Perfect for todays sports cars with panel gaps too small for a traditional clamp Fits any boot lid that takes the racks foot print of 102 x 48 cm / 58" x 29" Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off therefore theft is difficult. If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task. Supplied with 2 luggage straps and storage bag Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off ! The Rack Frame : This TT luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17" The Supports : The rack is secured to your cars boot/trunk lid using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage. The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum. Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid Whats in the box ? Revo-Rack frame 3 vacuum cups 2 x luggage straps Large black storage bag for rack frame Small black storage bag for vacuum cups Learn More
  15. Audi TT Roadster Portaequipajes
    £229.95
    Revo-Rack es un tipo de portaequipajes Audi TT Roadster completamente nuevo que prácticamente elimina el riesgo de daños en la pintura que suelen provocar las abrazaderas o cintas de acero en el borde de la tapa del maletero. Su diseño universal también le permite adaptarse a cualquier tapa de maletero en la que quepa el área del bastidor, independientemente de su forma o tamaño. Con el portaequipajes Audi TT Roadster Revo-Rack, ninguna pieza metálica toca su coche, solamente unas ventosas de vacío de goma suave. Estas ventosas utilizan la presión de la atmósfera para fijar el portaequipajes al maletero de su coche. Razones para elegir el portaequipajes Audi TT Roadster Revo-Rack Para todos los modelos No tiene abrazaderas No tiene pernos No precisa perforaciones No daña la pintura No interfiere con la instalación de un alerón trasero Perfecto para los coches deportivos actuales con espacios entre los paneles demasiado pequeños para una abrazadera tradicional Se adapta a cualquier tapa de maletero en la que quepa el área del bastidor de 102 x 48 cm / 58" x 29" El Revo-Rack tiene una capacidad de carga nominal de 20 kg / 45 Ibs El bastidor del portaequipajes: Este portaequipajes Audi TT Roadster se fabrica con tubos de 25 mm / 1" 6063-T5. Se trata de una aleación de aluminio y magnesio (nunca se oxidará). Como resultado, el bastidor del portaequipajes solamente pesa 1,672 kg / 3,6 lbs –un peso perfecto para las tapas de maleteros compuestas y de aluminio actuales. Los travesaños se sueldan a máquina para garantizar su solidez, y el armazón va revestido en pintura en polvo negra. El portaequipajes mide 900 x 420 mm / 36" x 17" Los soportes: El portaequipajes se fija a la tapa de su maletero mediante 3 ventosas de vacío de 115 mm, con una capacidad de sujeción nominal cada una de 18 kg / 40 lbs según el fabricante. Las ventosas de vacío emplean la fuerza de la presión atmosférica para agarrarse a una superficie: Cuando hay vacío entre la ventosa y la superficie a la que está pegada, el peso de la atmósfera de la tierra mantiene a la ventosa en su lugar con una fuerza increíble. Al contrario de las ventosas de succión que producen un vacío al tirar de la superficie, las ventosas de vacío de Revo-Rack emplean una bomba de accionamiento manual para eliminar de forma eficaz el aire que se encuentra entre la almohadilla de goma y la superficie de fijación, creando así una sujeción mucho más fiable. La bomba de las ventosas de vacío de Revo-Rack cuenta con un pistón con una línea roja, que hace de indicador del vacío. Unas cuantas carreras del pistón generan el vacío en la almohadilla, haciendo que se quede sellada a la tapa del maletero. Cuando la ventosa se haya fijado completamente, el pistón se deja de mover y la línea roja queda oculta en la bomba. Una línea roja visible indica si hay aire que se haya filtrado de nuevo a la almohadilla, haciendo que el vacío sea insuficiente para utilizar la ventosa. No obstante, si la línea roja se hace visible mientras se está utilizando la ventosa, una válvula de retención permite al usuario volver a bombear la ventosa sin perder el vacío restante. Al levantar la pestaña de liberación cerca del borde de la almohadilla el aire puede volver a llenar el espacio en el que se había generado el vacío, de manera que la ventosa de vacío se separe completamente. El bastidor se mantiene a 7,5 cm / 3" de la tapa del maletero. Learn More

Grid List

Set Descending Direction

1-15 of 140

Trustpilot