Mazda MX5 MK3 / Miata NC Trunk Luggage Rack : Revo-Rack Black
€ 349,95
På lager
Revo-Rack is a completely new type of MX5 Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge.
Revo-Rack was developed for the MX5 ND as the panel gaps are only 2-3mm / 0.12" there is no room for a traditional luggage rack clamp on the boot lid edge, but it will also fit the NC and Roadster Coupe and eliminate the risk of paint damage. It is possible to operate the roof on the Roadster Coupe with the rack fitted.
With the Revo-Rack luggage rack no metal touches your MX5 NC only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda. The grey buttons on the side of the cups pump the air out, these are not suctions cups. Suction creates vacuum.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests, its the only luggage rack for sale globally that has been certified to this level.
All Revo-Racks are supplied with a storage bag and two webbing luggage straps - no more lost bits.
Why a Revo-Rack Luggage Rack ?
No clamps on the fragile boot/trunk lid edges
No bolts
No 3M tape great on the first use, after that leave them on to go yellow ?
No Straps to dent paint
Due to the 2-3mm / 0.12" panel gap on the NC MX5 between the trunk lid and rear quarter its really too small for a traditional clamp to fit, without damage to the car.
Revo-Racks load carrying capacity has been independently rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the boot/ lid - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
Over 10,000 sold since 2016 tried & tested.
Shipped globally with DHL from warehouses in the UK & Netherlands
The Revo-Rack Frame :
This luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your MX5 using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of paint damage.
In the box ?
Revo-Rack frame
Three vacuum cups & fixings
Black cotton storage bag
2 webbing luggage straps
Revo-Rack was developed for the MX5 ND as the panel gaps are only 2-3mm / 0.12" there is no room for a traditional luggage rack clamp on the boot lid edge, but it will also fit the NC and Roadster Coupe and eliminate the risk of paint damage. It is possible to operate the roof on the Roadster Coupe with the rack fitted.
With the Revo-Rack luggage rack no metal touches your MX5 NC only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda. The grey buttons on the side of the cups pump the air out, these are not suctions cups. Suction creates vacuum.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests, its the only luggage rack for sale globally that has been certified to this level.
All Revo-Racks are supplied with a storage bag and two webbing luggage straps - no more lost bits.
Why a Revo-Rack Luggage Rack ?
No clamps on the fragile boot/trunk lid edges
No bolts
No 3M tape great on the first use, after that leave them on to go yellow ?
No Straps to dent paint
Due to the 2-3mm / 0.12" panel gap on the NC MX5 between the trunk lid and rear quarter its really too small for a traditional clamp to fit, without damage to the car.
Revo-Racks load carrying capacity has been independently rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the boot/ lid - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
Over 10,000 sold since 2016 tried & tested.
Shipped globally with DHL from warehouses in the UK & Netherlands
The Revo-Rack Frame :
This luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your MX5 using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of paint damage.
In the box ?
Revo-Rack frame
Three vacuum cups & fixings
Black cotton storage bag
2 webbing luggage straps
Skriv din egen produktanmeldelse