Mazda MX5 Roadster Coupe Luggage Rack : Revo-Rack PA
€ 419,95
På lager
Revo-Rack is a completely new type of MX5 Roadster Coupe Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edges.
Revo-Rack was developed for the MX5 ND as the panel gaps are only 2-3mm / 0.12" there is no room for a traditional luggage rack clamp on the boot edge, but it will also fit the MK3 & Roadster and eliminate the risk of paint damage. It's possible to operate the roof on the Roadster Coupe with the rack fitted.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests. Its the only luggage rack for sale globally tested to this level.
With the Revo-Rack luggage rack no metal touches your MX5 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot. These are not suction cups the grey buttons on the side of the cup, pump the air our creating a very secure hold.
This model of the Revo-Rack is hand polished and anodised for a deep shine, all Revo-Racks are supplied with two luggage straps and a storage bag : no more lost bits !
Why a Revo-Rack Luggage Rack ?
No clamps on the fragile boot/trunk lid edge.
Roof can be operated with Revo-Rack fitted
No 3M tape great on the first use, after that ?
No Straps to dent paintwork
Over 10,000 sold since 2016 - tried & tested
Fits soft top MK3/NC & Roadster Coupe
Due to the 2-3mm panel gap on the MX5 between the boot lid and rear wing its really too small for a traditional clamp to fit, without damage.
Revo-Racks load carrying capacity has been independently rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the boot/trunk - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
Shipped globally from warehouses in the UK & Netherlands
The Revo-Rack Frame :
This luggage rack is manufactured from 25mm 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb. The cross bars are machine welded in place to ensure consistency, the rack is hand polished and anodised for a deep chrome like shine. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your MX5 using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
Whats in the box ?
Revo-Rack frame
3 vacuum cups
2 x luggage straps
Large black storage bag for rack frame
Revo-Rack was developed for the MX5 ND as the panel gaps are only 2-3mm / 0.12" there is no room for a traditional luggage rack clamp on the boot edge, but it will also fit the MK3 & Roadster and eliminate the risk of paint damage. It's possible to operate the roof on the Roadster Coupe with the rack fitted.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests. Its the only luggage rack for sale globally tested to this level.
With the Revo-Rack luggage rack no metal touches your MX5 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot. These are not suction cups the grey buttons on the side of the cup, pump the air our creating a very secure hold.
This model of the Revo-Rack is hand polished and anodised for a deep shine, all Revo-Racks are supplied with two luggage straps and a storage bag : no more lost bits !
Why a Revo-Rack Luggage Rack ?
No clamps on the fragile boot/trunk lid edge.
Roof can be operated with Revo-Rack fitted
No 3M tape great on the first use, after that ?
No Straps to dent paintwork
Over 10,000 sold since 2016 - tried & tested
Fits soft top MK3/NC & Roadster Coupe
Due to the 2-3mm panel gap on the MX5 between the boot lid and rear wing its really too small for a traditional clamp to fit, without damage.
Revo-Racks load carrying capacity has been independently rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the boot/trunk - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
Shipped globally from warehouses in the UK & Netherlands
The Revo-Rack Frame :
This luggage rack is manufactured from 25mm 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb. The cross bars are machine welded in place to ensure consistency, the rack is hand polished and anodised for a deep chrome like shine. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your MX5 using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
Whats in the box ?
Revo-Rack frame
3 vacuum cups
2 x luggage straps
Large black storage bag for rack frame
Skriv din egen produktanmeldelse