Mazda MX5 MK4 / Miata ND Luggage Rack : Revo-Rack Black

$628.92
In stock
Revo-Rack is an innovative design of Mazda MX5 MK4/ND Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge. In 2016 Revo-Rack was developed for the MK4/ND as the panel gaps are only 2-3mm 1/8" there is no room for a traditional luggage rack clamp on the boot/trunk lid edges.

With the Revo-Rack luggage rack no metal touches your MX5/Miata only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot or trunk. The grey buttons on the side of the cups pump the air out, these are not suction cups.

Revo-Rack has been independently safety tested by TUV Italy laboratory. Along with braking and speed tests to a loaded rack they applied a 645N force.

Why a Revo-Rack Mazda MX5 MK4/ND Luggage Rack ?

No clamps on the fragile aluminium boot/trunk lid edge
No bolts
Shipped globally with DHL from warehouses in the UK & Netherlands
No Straps
No paint damage
Due to the 3-4mm 1/8" panel gap on the MK4/ND its too small for a traditional clamp to fit.
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
Supplied with storage bag and two luggage straps


The Rack Frame :

This MX5 MK4 luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for the MK4's aluminium boot/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your MX5's boot/trunk lid using three 115mm/5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups. Suction creates vacuum

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Whats in the box ?

Revo-Rack frame
3 vacuum cups
2 x luggage straps
Large black storage bag for rack frame

Product Video

Write Your Own Review
You're reviewing:Mazda MX5 MK4 / Miata ND Luggage Rack : Revo-Rack Black
Your Rating