Peugeot RCZ Luggage Rack : Revo-Rack Black

¥52,492.50
在庫あり
Revo-Rack is a completely different, completely new type of Peugeot RCZ Luggage Rack, only manufactured by us in the UK.

It eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge/surface. Revo-Rack can be fitted in under a minute without any tools.

With the Revo-Rack luggage rack no metal touches your Peugeot only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off !


Why a Revo-Rack ?
Fits in 30 seconds no tools required, no fiddly brackets or bolts.
With the tiny panel gaps on modern Peugeot cars fitting a conventional rack without damaging the boot edge or surface is almost impossible.
Lightweight aluminium & magnesium frame weighs 1.7kg will never rust
No straps or clamps on the boot surface/edge
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
Supplied with two luggage straps and storage bag
Made in the UK by the boot-bag group
The Revo-Rack is not designed for permanent fitting, its designed to be used for a days driving/travel then removed from the car. Remove it, re moisten the vacuum cups with water and refit on multi day trips. ( It takes 1 minute )
Signed for delivery by DHL with a one hour delivery slot
Despatched next working day on a next day service if ordered before 3pm i.e. order Monday at 3 receive Wednesday.




The Rack Frame :
This luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy. As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm/36"x17"



The Vacuum Cup Supports :
The rack is secured to your cars boot/trunk lid using three 115mm vacuum cups, rated as capable of holding an 18kg/40lb load each, technically the rack can hold 54kg.

The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still recognised as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tabs near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

For more detailed information please see www.revo-rack.com



Revo-racks design is protected by UK, EU and North American Patents.



Product Video

あなたのレビューを投稿する
レビュー中の商品:Peugeot RCZ Luggage Rack : Revo-Rack Black
あなたのレーティング