Mazda Miata ND Trunk Luggage Rack : Revo-Rack Black ( Specific Model for ND With Sirius antenna or lip spoiler )
$397.70
In stock
Revo-Rack is a completely new type of Mazda Miata MK4/ND/RF Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the deck/trunk lid edge. Revo-Rack was developed for the MK4/ND as the panel gaps are only 1/8" there is no room for a traditional luggage rack clamp on the deck/trunk lid edge.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests
With the Revo-Rack system no metal touches your Miata/MX5 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's deck lid or trunk lid.
This model of Revo-Rack is specific to the ND & RF with a Sirius Antenna or lip spoiler on the trunk lid. It has an additional hole drilled in the frame so the third vacuum cup can be mounted to avoid the Sirius antenna or rear spoiler.
Why a Revo-Rack Mazda Miata Trunk Luggage Rack ?
No clamps on the fragile deck lid edge
No bolts
No drilling
No Straps
No paint damage
Due to the 1/8" panel gap on the ND Miata its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
Revo Racks load carrying capacity has been rated at 45Ibs
Not immediately obvious how to release the rack from the deck/trunk lid - Impossible to pull off, therefore theft is difficult.
If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
This model of Revo-Rack is designed for the ND with the Sirius Antenna ( If your ND does not have an antenna purchase the standard Revo-Rack )
Shipped to the USA in 5-7 days with DHL
The Rack Frame :
This ND Miata luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lbs perfect for the ND's aluminium deck/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"
The Supports :
The rack is secured to your Miata's deck/trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 40lb load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Whats in the box ?
Revo-Rack frame black powder coated
3 vacuum cups
2 x luggage straps
2 Spacers and longer M6 bolts (optional)
3 original spacers and 3 M6 bolts
Large black storage bag for rack frame
Small black storage bag for vacuum cups
Read Mathew's review of the Revo-Rack on his camping road trip here
http://drivingisfreedom.com/2018/05/01/best-camping-vehicle-the-answer-is-always-miata/
"Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future. "
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests
With the Revo-Rack system no metal touches your Miata/MX5 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's deck lid or trunk lid.
This model of Revo-Rack is specific to the ND & RF with a Sirius Antenna or lip spoiler on the trunk lid. It has an additional hole drilled in the frame so the third vacuum cup can be mounted to avoid the Sirius antenna or rear spoiler.
Why a Revo-Rack Mazda Miata Trunk Luggage Rack ?
No clamps on the fragile deck lid edge
No bolts
No drilling
No Straps
No paint damage
Due to the 1/8" panel gap on the ND Miata its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
Revo Racks load carrying capacity has been rated at 45Ibs
Not immediately obvious how to release the rack from the deck/trunk lid - Impossible to pull off, therefore theft is difficult.
If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
This model of Revo-Rack is designed for the ND with the Sirius Antenna ( If your ND does not have an antenna purchase the standard Revo-Rack )
Shipped to the USA in 5-7 days with DHL
The Rack Frame :
This ND Miata luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lbs perfect for the ND's aluminium deck/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"
The Supports :
The rack is secured to your Miata's deck/trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 40lb load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Whats in the box ?
Revo-Rack frame black powder coated
3 vacuum cups
2 x luggage straps
2 Spacers and longer M6 bolts (optional)
3 original spacers and 3 M6 bolts
Large black storage bag for rack frame
Small black storage bag for vacuum cups
Read Mathew's review of the Revo-Rack on his camping road trip here
http://drivingisfreedom.com/2018/05/01/best-camping-vehicle-the-answer-is-always-miata/
"Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future. "
Write Your Own Review
Related Products
Check items to add to the cart or
We found other products you might like!
