Mazda Miata PRHT NC Trunk Luggage Rack : Revo-Rack Black

94% of 100
In stock
Only 0 left
Revo-Rack is a completely new type of Miata Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the trunk lid edge.

Revo-Rack was developed for the Miata ND as the panel gaps are only 2-3mm / 0.12" there is no room for a traditional luggage rack clamp on the trunk edge, but it will also fit the NC & PRHT and eliminate the risk of paint damage. It is possible to operate the roof on the PRHT with the rack fitted.

With the Revo-Rack luggage rack no metal touches your Miata only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's trunk or deck lid.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests, its the only luggage rack for sale globally that has been certified to this level.

Why a Revo-Rack Luggage Rack ?

No clamps on the fragile deck lid edges
No bolts
No drilling
No Straps
No paint damage
Due to the 3-4mm / 0.12" panel gap on the Miata/MX5 between the trunk lid and rear quarter its really too small for a traditional clamp to fit, without damage to the trunk.
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the deck lid - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
Shipped to the USA in 5-7 days with DHL.

The Rack Frame :

This luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your Miata using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of paint damage.

Read Mathew's review of the Revo-Rack on his camping road trip here

"Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future. "

Product Video

Write Your Own Review
You're reviewing:Mazda Miata PRHT NC Trunk Luggage Rack : Revo-Rack Black
Your Rating