Mazda MX5 RF Luggage Rack - Revo-Rack : Polished & Anodised ( No spoiler / No Antenna )

$659.93
In stock
Revo-Rack is a completely new type of Mazda MX5 RF Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/deck lid edge.

Revo-Rack was developed for the RF & ND MX5/Miata as the panel gaps are only 2-3mm/1/8" there is no room for a traditional luggage rack clamp on the boot edge. This version is hand polished aluminium then anodised for a deep shine.

With the Revo-Rack car boot rack no metal touches your MX5/Miata only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot or trunk lid. The grey buttons on the side of the cups pump the air out, these are not suction sups. Suction creates vacuum.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests.

Why a Revo-Rack Mazda MX5/Miata RF Luggage Rack ?

No metal clamps on the fragile boot/deck lid edge
No awkward bolts
Shipped globally from our warehouses in the UK & Netherlands
Over 10,000 sold since 2016 tried and tested
Due to the 3-4mm/1/8" panel gap on the RF its too small for a traditional clamp to fit without paint damage.
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
Roof can be operated on the RF with the rack fitted.
Supplied with luggage straps and cotton storage bag

The Revo-Rack Frame :

This MX5/Miata RF luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for the MK4's aluminium boot/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is hand polished then anodised for a deep shine. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your MX5'/Miata's boot/deck lid using three 115mm/5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Whats in the box ?
Revo-Rack PA Frame
3 Vacuum cups
Fitting kit
Black cotton storage bag
2 x luggage straps

Product Video

Write Your Own Review
You're reviewing:Mazda MX5 RF Luggage Rack - Revo-Rack : Polished & Anodised ( No spoiler / No Antenna )
Your Rating