Audi A4 Convertible Luggage : Revo-Rack Black
€349.95
In stock
Revo-Rack is a innovative design of Audi A4 Convertible Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge.
Revo-Rack was developed in 2016 for modern cabrio such as the A4 as the panel gaps are only 2-3mm there is no room for a traditional metal luggage rack clamp on the boot/trunk lid edge without a high risk of paint damage.
With the Revo-Rack luggage rack no metal touches your Audi only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your car. The grey buttons on the side of the cups physically pump the air out, these are not suction cups.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : Its the only luggage rack for sale globally that has been tested to this level.
Why a Revo-Rack Luggage Rack ?
No clamps on the fragile aluminium boot/trunk lid edge.
Shipped globally from our warehouses in the UK & Netherlands
Over 10,000 sold since 2016
1.7kg aluminum frame powder coated black
No Straps to cause dents in the paint across the boot/trunk lid
Due to the 2-3mm panel gap on modern Audi between the boot/trunk lid and rear wing/quarter its really too small for a traditional clamp to fit, without damage.
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs by TUV Italy
Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
The Revo-Rack Frame :
This luggage rack is manufactured from 25mm 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg The cross bars are machine welded in place to ensure consistency. The Revo-Rack measures 90x42cm
The Supports :
The rack is secured to your Audi using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups. Suction creates vacuum.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the car’s paint thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the car, distortion is reduced, allowing the cup to be used with very very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the paintwork. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Whats in the box ?
Revo-Rack frame
3 vacuum cups
2 x luggage straps
Large black storage bag for rack frame
Revo-Rack was developed in 2016 for modern cabrio such as the A4 as the panel gaps are only 2-3mm there is no room for a traditional metal luggage rack clamp on the boot/trunk lid edge without a high risk of paint damage.
With the Revo-Rack luggage rack no metal touches your Audi only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your car. The grey buttons on the side of the cups physically pump the air out, these are not suction cups.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : Its the only luggage rack for sale globally that has been tested to this level.
Why a Revo-Rack Luggage Rack ?
No clamps on the fragile aluminium boot/trunk lid edge.
Shipped globally from our warehouses in the UK & Netherlands
Over 10,000 sold since 2016
1.7kg aluminum frame powder coated black
No Straps to cause dents in the paint across the boot/trunk lid
Due to the 2-3mm panel gap on modern Audi between the boot/trunk lid and rear wing/quarter its really too small for a traditional clamp to fit, without damage.
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs by TUV Italy
Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps for luggage and storage bag
The Revo-Rack Frame :
This luggage rack is manufactured from 25mm 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg The cross bars are machine welded in place to ensure consistency. The Revo-Rack measures 90x42cm
The Supports :
The rack is secured to your Audi using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups. Suction creates vacuum.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the car’s paint thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the car, distortion is reduced, allowing the cup to be used with very very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the paintwork. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Whats in the box ?
Revo-Rack frame
3 vacuum cups
2 x luggage straps
Large black storage bag for rack frame
Write Your Own Review
We found other products you might like!
