Morgan Plus 4/6/8 & Aero 8 Luggage Rack : Revo-Rack Black

Revo-Rack is a completely new type of Morgan Roadster Luggage Rack eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge. We manufacture the rack ourselves and its available in either black or polished anodised finish,

With the Revo-Rack car boot rack no metal touches your Morgan only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mogs boot or trunk.

Why a Revo-Rack Morgan Roadster Luggage Rack ?

No clamps
No bolts
No drilling
No paint damage
Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE.
Revo-Racks load carrying capacity has been rated at 20kg / 40Ibs on the Roadster
Fitted and removed in under a minute ( see video below )
Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task
Supplied with two luggage straps and a cotton storage bag

The Rack Frame :

This Morgan Roadster luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your Morgans's boot/trunk lid using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.