Mazda Miata RF Luggage Rack - Revo-Rack : Polished & Anodised ( No spoiler no antenna )

97% of 100
In stock
Revo-Rack is a completely new type of Mazda Miata RF Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile deck lid edge.

Revo-Rack was developed for the MK4/ND MX5/Miata as the panel gaps are only 1/8" there is no room for a traditional luggage rack clamp on the deck lid edge. We make the rack in black and this version is hand polished then anodised for a deep shine.

With the Revo-Rack car boot rack no metal touches your Miata only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's trunk lid.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off !

Why a Revo-Rack Mazda Miata RF Luggage Rack ?

No clamps on the fragile deck lid edge
No bolts
No drilling
No Straps
No paint damage
Due to the 1/8" panel gap on the MK4/ND its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
Roof can be operated on the RF with the rack fitted.
Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
Supplied with luggage straps and cotton storage bag
Shipped to the USA with DHL in 3-5 days


The Rack Frame :

This Miata RF luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for the MK4's aluminium boot/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is hand polished then anodised for a deep shine. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your Miata's deck lid using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Whats in the box ?

Revo-Rack frame
3 vacuum cups
2 x luggage straps
Large black storage bag for rack frame
Small black storage bag for vacuum cups
2 Luggage straps

Read Mathew's review of the Revo-Rack on his camping road trip here

"Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future."

Product Video

Write Your Own Review
You're reviewing:Mazda Miata RF Luggage Rack - Revo-Rack : Polished & Anodised ( No spoiler no antenna )
Your Rating