Revo-Rack Black for E85 BMW Z4

100% of 100
In stock
Revo-Rack is a completely new type of BMW Z4 E85 Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the deck lid edges. The Z4 E85 requires a specific model of the Revo-Rack which is supplied with two multi directional stainless steel ball and socket joints allowing the rack to sit flat and secure the trunk lid.

With the Revo-Rack car boot rack no metal touches your BMW only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your BMW.

Why a Revo-Rack BMW Z4 E85 Luggage Rack ?

No clamps on the the fragile deck lid edges
No bolts
No drilling
No Straps
No paint damage
Due to the 1/8" panel gap on the E85 its very small for a traditional clamp to or strap to fit without paint damage
Fits any boot lid that takes the racks foot print of 102 x 48 cm / 58" x 29"
Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
Supplied with 2 straps to secure luggage and storage bag

The Rack Frame :

This Z4 luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for the Z4's trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your Z4's trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each. These are very different to suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum

Product Video

Write Your Own Review
You're reviewing:Revo-Rack Black for E85 BMW Z4
Your Rating